FerroR

Brick and brick slips surfaces with the same name are not completely identical but they are designed to fit with each other and to be used next to each other in the same wall.
If looking for an identical look the brick slips have to be cut from a normal brick.

Thin manufactured brick slip is often the more cost effective option and it can also vary in thickness (19mm-39mm)
Also corner brick slips can be manufactured cost effectively
Thin manufactured slips endure weather slightly better since they are made with more dense clay mixture making them absorb less moisture
Producing facade panels with brick finish is easier with our manufactured thin brick slips as they are extremely accurate in size and they are also noticeably more durable than alternative options

In order to produce facade panels with a realistic brick finish, corner slips are required nearly always
Corner slips can be manufactured from any colour or size
Below are some examples of the most common corner slips

ID	Size (mm)	Weight (kg)	Consumption (pcs/m²)
SNF	250x120x62	2,3	52
DNF	228x108x54	2,0	62
UKF	215x102x65	1,9	60
RT60	285x135x60	2,9	47
NRT60	270x130x60	2,7	50
MRT60	285x85x60	1,9	47
RT75	285x135x75	3,4	39
MRT75	285x85x75	2,3	39
MRT85	285x85x85	2,6	35
RT85	285x135x85	4,1	35
NRT75	270x130x75	3,2	42

ID	Size (mm)	Weight (kg)	Consumption (pcs/m2)
SNF	250x62x19*	0,6	52
DNF	228x54x19*	0,5	62
UKF	215x65x19*	0,5	60
MTL85	285x85x19*	0,9	35
MTL75	285x75x19*	0,8	39
NTL75	270x75x19*	0,8	42
MTL60	285x60x19*	0,6	47
TL185	185x185x22	1,5	25
TL135	135x135x19	0,8	46

*The thickness of a brick slip can vary from 19mm to 39mm. Thicker slips (e.g. 45mm) have to be cut from a brick.

ID	Size (mm)	Weight (kg)	Pcs/pallet	Consumption (pcs/m²)
SNF	250x120x62	2,3		52
DNF	228x108x54	2,0		62
UKF	215x102x65	1,9		60
RT60	285x135x60	3,2	96	47
NRT60	270x130x60	2,8	96	50
MRT60	285x85x60	2,3	128	47
RT75	285x135x75	4,2	72	39
MRT75	285x85x75	2,4	96	39
MRT85	285x85x85	2,6	96	35
RT85	285x135x85	4,4	72	35
NRT75	270x130x75	3,4	72	42

ID	Size (mm)	Weight (kg)	Consumption (pcs/m2)
SNF	250x62x19*	0,6	52
DNF	228x54x19*	0,5	62
UKF	215x65x19*	0,5	60
MTL85	285x85x19*	0,9	35
MTL75	285x75x19*	0,8	39
NTL75	270x75x19*	0,8	42
MTL60	285x60x19*	0,6	47
TL185	185x185x22	1,5	25
TL135	135x135x19	0,8	46

*The thickness of a brick slip can vary from 19mm to 39mm. Thicker slips (e.g. 45mm) have to be cut from a brick.

Test how different colours, surfaces and mortars affect the look of a brick wall.

EPDs are a voluntary and transparent way to present fundamental information about the environmental impacts of products.

You can download the declaration of performance from the link below.